LD Systems LDWSECO2X2R2 Double Receiver User Manual

Inleiding

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Belangrike veiligheidsinstruksies

• Lees hierdie instruksies: Alle veiligheids- en bedryfsinstruksies moet gelees word voordat die produk gebruik word.
• Keep these instructions: Die veiligheids- en bedryfsinstruksies moet bewaar word vir toekomstige verwysing.
• Let op alle waarskuwings: Alle waarskuwings op die produk en in die gebruiksinstruksies moet nagekom word.
• Volg al die instruksies: Alle gebruiks- en gebruiksinstruksies moet gevolg word.
• Moenie hierdie toestel naby water gebruik nie: Moenie hierdie produk naby water of vog gebruik nie.
• Clean only with dry cloth: Ontkoppel hierdie produk uit die muurprop voor skoonmaak.
• Ventilasie: Moenie enige ventilasie-openinge blokkeer nie. Installeer volgens die vervaardiger se instruksies.
• Kragbronne: Operate this product only from the type of power source indicated on the marking label.
• Diens: Moenie probeer om hierdie produk self te versien nie, aangesien die oopmaak of verwydering van deksels jou kan blootstel aan gevaarlike voltage of ander gevare. Verwys alle diens na gekwalifiseerde dienspersoneel.

Pakketinhoud

Maak asseblief seker dat al die items wat hieronder gelys word, in u pakket ingesluit is:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Gebruikershandleiding (hierdie dokument)
• Antennas (quantity may vary based on model variant)

Produk verbyview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Beeld: Voorkant view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Voorpaneelkontroles:

• Kragknoppie: Skakel die eenheid aan of af.
• Kanaalvertoning: Shows the currently selected channel for each receiver.
• Volumebeheer: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Agterpaneelverbindings:

• Antenna-insette: Koppel die meegeleverde antennas.
• Gebalanseerde XLR-uitsette: For connecting to professional audio mixers or amplewendes.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• GS-kraginvoer: Koppel die meegeleverde kragadapter aan.

Opstelgids

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Unpack the Receiver: Verwyder alle komponente versigtig uit die verpakking.
2. Verbind Antennas: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Posisioneer die ontvanger: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Koppel klankuitsette:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or amplewendiger.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Koppel krag: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Krag aan: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Bedryfsinstruksies

1. Krag aan: Ensure both the receiver and your wireless transmitters are powered on.
2. Kontroleer sein: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Pas volume aan: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Monitor oudio: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Channel Selection (if applicable): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Skakel af: When finished, power off your transmitters first, then power off the receiver.

Onderhoud

• Skoonmaak: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the receiver. Do not use liquid cleaners or aerosol sprays.
• Berging: When not in use for extended periods, store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• antennas: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• Kragadapter: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Note: Information regarding spare parts availability is not provided in the product details.