Technics SL-PD667

Technics SL-PD667 5-Disc CD Changer User Manual

Model: SL-PD667

1. Inleiding

This manual provides comprehensive instructions for the safe and efficient operation of your Technics SL-PD667 5-Disc CD Changer. Please read these instructions thoroughly before using the unit to ensure proper setup and to maximize your listening experience. The SL-PD667 features a 5-disc carousel system and incorporates multi-stage noise shaping technology for high-fidelity audio playback.

Technics SL-PD667 Compact Disc Changer Operating Instructions Manual Cover

Figure 1: Front cover of the Technics SL-PD667 user manual, showing the product name and a graphic of musical instruments.

2. Veiligheidsmaatreëls

  • Kragbron: Koppel die eenheid slegs aan 'n wisselstroomaansluiting van die volume.tage gespesifiseer op die agterpaneel.
  • Ventilasie: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow.
  • Vog: Moenie die eenheid aan reën of vog blootstel nie. Vermy die plasing van voorwerpe gevul met vloeistowwe, soos vase, op die eenheid.
  • Buitelandse voorwerpe: Moenie enige voorwerpe in die eenheid se openinge steek nie.
  • Diens: Moenie probeer om die eenheid self te diens nie. Verwys alle diens na gekwalifiseerde dienspersoneel.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

  • Technics SL-PD667 5-Disc CD Changer Unit
  • Kragkoord
  • Gebruikershandleiding (hierdie dokument)
  • Remote Control (if included with your specific purchase)
  • Audio Cables (RCA type, if included)

4. Opstelling

4.1 Uitpak

Carefully remove the CD changer from its packaging. Retain the packaging materials for future transport or storage.

4.2 Plasing

Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibration. Ensure there is sufficient space around the unit for proper ventilation.

4.3 Verbindings

Connect the CD changer to your audio system using the appropriate cables. Refer to the rear panel diagram for connection points.

  1. Kragverbinding: Insert the supplied power cord into the AC IN socket on the rear panel of the CD changer, then plug the other end into a wall outlet.
  2. Oudio-uitvoer:
    • Analog Output (RCA): Connect the L (white) and R (red) RCA jacks on the CD changer's rear panel to the corresponding analog audio input jacks on your ampverligter of ontvanger.
    • Coaxial Digital Output: Connect a coaxial digital audio cable from the COAXIAL DIGITAL OUT jack on the CD changer to a coaxial digital input on your ampverligter of ontvanger.
    • Optiese digitale uitset: Connect an optical digital audio cable from the OPTICAL DIGITAL OUT jack on the CD changer to an optical digital input on your ampverligter of ontvanger.
  3. Remote Control (RI): If using a compatible Technics AV Control Stereo Receiver (e.g., SA-GX670), connect the RI remote control cable to the RI jacks on both units for integrated control.
Technics SL-PD667 5-Disc CD Changer Rear Panel Connections

Figuur 2: Agter view of the Technics SL-PD667 CD Changer, highlighting the analog RCA, coaxial digital, optical digital audio outputs, and remote control ports.

5. Bedryfsinstruksies

5.1 Krag aan/af

Druk die STANDBY/AAN knoppie op die voorpaneel of die afstandbeheerder om die eenheid aan of af te skakel.

5.2 Loading Discs

  1. Druk die OOP/TOUS om die skyfbak oop te maak.
  2. Place up to five CDs onto the disc carousel, ensuring they are seated correctly with the label side facing up.
  3. Druk die OOP/TOUS button again to close the disc tray. The unit will scan the discs.

5.3 Basiese Terugspeel

  • Speel: Druk die PLAY/PAUSE (►/▐▐) knoppie om die afspeel te begin.
  • Pouse: Druk die PLAY/PAUSE (►/▐▐) button during playback to pause. Press again to resume.
  • stop: Druk die STOP (■) knoppie om die afspeel te stop.

5.4 Disc Selection

To select a specific disc from the loaded carousel:

  • Druk die ooreenstemmende DISC SELECT button (1-5) on the front panel or remote control. The unit will rotate to the selected disc and begin playback.
  • Alternatiewelik, gebruik die SKYF SKIP button to cycle through the loaded discs.

5.5 Spoornavigasie

  • Slaan oor: Druk die (►►) knoppie om na die volgende snit oor te gaan. Druk die (◄◄) button to return to the beginning of the current track or the previous track.
  • Snel vorentoe/terugspoel: Druk en hou die (►►) or (◄◄) buttons during playback to fast forward or rewind within a track.

5.6 Terugspeelmodusse

  • Herhaal: Druk die HERHAAL button to cycle through repeat modes (e.g., repeat current track, repeat current disc, repeat all discs).
  • Willekeurig: Druk die EVALLEKLIK button to play tracks in a random order across all loaded discs.

5.7 Display and Dimmer

  • Vertoon: Druk die VERTONING button to change the information shown on the front panel display (e.g., track number, elapsed time, remaining time).
  • Dowwer: Druk die DOWWER button to adjust the brightness of the front panel display.

6. Onderhoud

6.1 Skoonmaak van die eenheid

Vee die buitekant van die eenheid af met 'n sagte, droë lap. Vir hardnekkige vlekke, gebruik 'n lap wat liggies gedroog word.ampened with a mild detergent solution, then wipe dry. Do not use abrasive cleaners or solvents.

6.2 Skyfversorging

Handle CDs by their edges. Avoid touching the playing surface. Clean dirty discs with a soft, lint-free cloth, wiping from the center outwards. Do not use record cleaners or abrasive materials.

7. Probleemoplossing

If you encounter problems with your CD changer, refer to the following table for common issues and solutions:

ProbleemMoontlike oorsaakOplossing
Geen krag nieKragkabel nie stewig gekoppel nie.Kontroleer die kragkabelverbinding met die eenheid en die muurprop.
Skyf speel nieDie skyf is vuil, gekrap of verkeerd geplaas.Clean the disc, check for scratches, and ensure it is placed correctly on the tray.
Geen klank nieAudio cables not connected properly or wrong input selected on amplewendiger.Verify audio cable connections and select the correct input source on your ampverligter/ontvanger.
Afstandbeheer werk nieBatteries are depleted or remote is not aimed correctly.Replace remote control batteries. Ensure no obstructions between remote and unit.

Indien die probleem voortduur nadat u hierdie oplossings probeer het, kontak asseblief gekwalifiseerde dienspersoneel.

8. Spesifikasies

  • Model Naam: SL-PD667
  • Handelsmerk: Tegnika
  • Kleur: Swart
  • Verbindingstegnologie: Hulp
  • Spesiale kenmerk: Multi Stage Noise Shaping
  • Item gewig: 2.99 pond
  • Pakket afmetings: 17.99 x 12.99 x 5.98 duim
  • Vervaardiger: Matsushita Electric Industrial Co

9. Waarborg en Ondersteuning

Vir waarborginligting en tegniese ondersteuning, verwys asseblief na die waarborgkaart wat by u produk ingesluit is of besoek die amptelike Technics-webwerf. webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.

© 2023 Technics. Alle regte voorbehou.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.