Honeywell Home RTH2300B1012/E1 5-2 Day Programmable Thermostat User Manual

Inleiding

The Honeywell Home RTH2300B1012/E1 is a 5-2 day programmable thermostat designed for simple and efficient control of your home's heating and cooling system. This thermostat allows you to set distinct programs for weekdays and weekends, helping to optimize energy usage by adjusting temperatures when you are away or asleep. Its backlit digital display ensures clear visibility of settings and current conditions. This manual provides comprehensive instructions for installation, operation, and maintenance to ensure optimal performance and comfort.

Beeld: Voorkant view of the Honeywell Home RTH2300B1012/E1 programmable thermostat, showing its digital display and control buttons.

Veiligheidsinligting

• WAARSKUWING: Elektriese gevaar. Disconnect power to the heating/cooling system at the circuit breaker or fuse box before installing or servicing the thermostat. Failure to do so could result in electrical shock or equipment damage.
• This thermostat is designed for low-voltage (24V) systems. Do not use on line voltage (120-240V) applications, such as electric baseboard heaters.
• Installation should be performed by a qualified technician if you are unsure about wiring procedures.
• Maak seker dat alle bedradingsverbindings veilig is en aan plaaslike elektriese kodes voldoen.

Pakketinhoud

Verifieer dat jou pakket die volgende items bevat:

• Honeywell Home RTH2300B1012/E1 Programmable Thermostat
• Wall Plate (mounting hardware included)
• Gebruikershandleiding (hierdie dokument)

Let wel: Two AAA batteries are required for operation and are not included in the package.

Image: The Honeywell Home RTH2300B1012/E1 thermostat shown in its retail packaging, highlighting its 5-2 day programmability and backlit display.

Verenigbaarheid

Hierdie termostaat is versoenbaar met die volgende stelsels:

• Enkel-stage heating/cooling systems
• Heating-only systems
• Cooling-only systems
• Heat pumps without backup heat
• Millivolt stelsels
• Pellet stoves and fireplaces

This thermostat is NIE versoenbaar met:

• Electric baseboard heat (120-240V)
• Heat pump systems with backup heat
• Multi-stage heating/cooling systems

Image: Back of the thermostat packaging, detailing features, compatibility, and contact information for support.

Installasie (Opstelling)

Follow these steps to install your new thermostat:

1. Skakel krag af: Before beginning, turn off the power to your heating and cooling system at the circuit breaker or fuse box.
2. Verwyder ou termostaat: Carefully remove your old thermostat from the wall.
3. Etiketteer Drade: As you disconnect each wire, use the provided labels (if any) or masking tape to clearly mark each wire with the letter corresponding to its terminal on the old thermostat (e.g., R, G, Y, W, C). This step is crucial for correct wiring.
4. Monteer muurplaat: Position the new thermostat's wall plate on the wall. Use the included screws and anchors to secure it. Ensure it is level for aesthetic purposes.
5. Koppel drade: Connect the labeled wires to the corresponding terminals on the new wall plate. Refer to the wiring diagram in your specific system's manual if needed. Ensure connections are tight.
6. Installeer batterye: Insert two fresh AAA alkaline batteries into the battery compartment of the thermostat.
7. Heg termostaat aan: Align the thermostat with the wall plate and gently push until it snaps securely into place.
8. Herstel krag: Turn the power back on to your heating and cooling system at the circuit breaker or fuse box.
9. Configure Blower Switch: On the back of the thermostat unit, locate the small switch labeled 'Gas' or 'Electric'. Set this switch according to your furnace type. 'Gas' is for gas or oil furnaces, 'Electric' is for electric furnaces or heat pumps.

Bedryfsinstruksies

Basiese kontroles

• Stel knoppie: Used to enter programming mode and confirm selections.
• Hou knoppie: Used to temporarily or permanently hold the current temperature.
• Run-knoppie: Used to exit programming mode and resume the programmed schedule.
• Op/af pyle: Used to adjust temperature settings, time, and navigate programming options.
• System Switch (Heat/Off/Cool): Located at the bottom of the thermostat, select your desired operating mode.
• Fan Switch (Auto/On): Located at the bottom of the thermostat, select fan operation. 'Auto' runs the fan only when heating or cooling is active. 'On' runs the fan continuously.

Stel tyd en dag in

1. Druk die Stel button once. The time will flash.
2. Gebruik die Op/af-pyltjies om die uur aan te pas. Druk Stel.
3. Gebruik die Op/af-pyltjies om die notule aan te pas. Druk Stel.
4. Gebruik die Op/af-pyltjies to adjust the day of the week. Press Stel to save and exit, or Hardloop om te verlaat sonder om te stoor.

Programming the 5-2 Day Schedule

This thermostat allows for one program for weekdays (Monday-Friday) and a separate program for weekends (Saturday-Sunday), each with four periods per day (Wake, Leave, Return, Sleep).

1. Druk die Stel button repeatedly until 'Set Program' appears on the display. The weekday (Mon-Fri) 'Wake' period will be displayed.
2. Wake Period: Gebruik die Op/af-pyltjies to set the desired wake time, then press Stel. Gebruik die Op/af-pyltjies to set the desired temperature for the wake period, then press Stel.
3. Leave Period: Repeat the process for the 'Leave' time and temperature, then press Stel.
4. Terugkeerperiode: Repeat the process for the 'Return' time and temperature, then press Stel.
5. Sleep Period: Repeat the process for the 'Sleep' time and temperature, then press Stel.
6. The thermostat will now display the weekend (Sat-Sun) 'Wake' period. Repeat steps 2-5 for the weekend schedule.
7. After setting the weekend 'Sleep' period, press Stel to save all changes and exit programming, or press Hardloop to exit without saving the last changes.

Gebruik die Hou-funksie

The Hold function allows you to temporarily or permanently override the programmed schedule.

• Tydelike vashou: While in normal operation, use the Op/af-pyltjies to adjust the temperature. The new temperature will be held until the next programmed period begins. 'Temporary Hold' will be displayed.
• Permanente bewaring: Druk die Hou vas button. 'Hold' will appear on the display. Use the Op/af-pyltjies to set the desired temperature. This temperature will be maintained indefinitely until you press the Hardloop button to resume the program.

Agterlig

The display backlight activates for approximately 8 seconds when any button is pressed, improving visibility in low-light conditions.

Onderhoud

Battery vervanging

The thermostat requires two AAA alkaline batteries. When the battery icon appears on the display, replace the batteries immediately to ensure continuous operation. The thermostat retains its programming for a short period during battery replacement.

1. Remove the thermostat from the wall plate by gently pulling it forward.
2. Maak die batterykompartement oop en verwyder die ou batterye.
3. Insert two new AAA alkaline batteries, observing the correct polarity (+/-).
4. Snap the thermostat back onto the wall plate.

Skoonmaak

Maak die buitekant van die termostaat skoon met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.

Probleemoplossing

Spesifikasies

Image: The Honeywell Home RTH2300B1012/E1 thermostat held in a hand, illustrating its compact size and dimensions.

Waarborg en Ondersteuning

This product comes with a manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Honeywell Home webwebwerf.

For technical support, troubleshooting assistance, or to view frequently asked questions, please visit: yourhome.honeywell.com

You may also contact customer service at 1-800-468-1502.