Inleiding
This manual provides essential instructions for the proper installation, operation, and maintenance of your Autopilot 17206 12-foot Cell Cord. Please read this manual thoroughly before installation and keep it for future reference.
Produk verbyview
The Autopilot 17206 is a 12-foot replacement cell cord designed for use with Autopilot marine electronic systems. It features a durable outer jacket and multiple internal conductors for reliable signal transmission.
Image: The Autopilot 17206 12-foot Cell Cord. One end terminates in a white molded connector, while the other end has exposed, color-coded wires (red, black, white, gray) ready for connection. The cable itself is white and coiled.
Opstelling en installasie
Proper installation is crucial for the optimal performance and longevity of the cell cord. Consult your primary Autopilot system's manual for specific wiring diagrams and connection points.
- Veiligheid eerste: Ensure all power to the Autopilot system and associated components is disconnected before beginning installation.
- Identifiseer verbindings: Locate the appropriate connection points on your Autopilot system where the cell cord will attach.
- Draad voorbereiding: If the cord end requires stripping, carefully strip the outer jacket and individual wire insulation to the recommended length as specified by your Autopilot system's manual.
- Koppel drade: Connect the color-coded wires of the 17206 cell cord to the corresponding terminals on your Autopilot system. Ensure a secure and correct polarity connection for each wire. Refer to your system's wiring diagram.
- Veilige verbindings: Use appropriate connectors (e.g., crimp connectors, terminal blocks) to ensure a robust and corrosion-resistant connection, especially in marine environments.
- Kabelroetering: Route the cable securely, avoiding sharp bends, pinch points, and areas exposed to excessive heat or abrasion. Use cable ties or clamps to secure the cord.
- Verifieer installasie: Once all connections are made and secured, double-check all wiring against your system's diagram.
- Herstel krag: Carefully restore power to the Autopilot system and test for proper functionality.
Let wel: Incorrect wiring can damage the cell cord or the Autopilot system. If you are unsure about any step, consult a qualified marine electronics technician.
Bedryfsinstruksies
The Autopilot 17206 Cell Cord is a passive component designed to transmit signals between your Autopilot system and its cell. Once correctly installed, its operation is integrated with the overall Autopilot system. Refer to your main Autopilot system's user manual for instructions on operating the system itself.
Onderhoud
- Gereelde inspeksie: Periodically inspect the entire length of the cord for any signs of wear, cuts, abrasions, or corrosion, especially at connection points.
- Skoonmaak: Keep the cord clean and free from dirt, salt, and debris. Use a damp cloth to wipe it down. Avoid harsh chemicals that could damage the cable jacket.
- Verbindingsintegriteit: Ensure all connections remain tight and free from corrosion. Apply dielectric grease to exposed terminals in marine environments to prevent oxidation.
- Omgewingsbeskerming: Protect the cord from prolonged exposure to direct sunlight, extreme temperatures, and physical damage.
Probleemoplossing
The cell cord itself is a relatively simple component. Most issues related to its function will stem from improper installation or physical damage.
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| System not responding / No signal | Loose or incorrect wiring connections. Damaged cord. | Check all connections for tightness and correct polarity. Inspect the cord for visible damage. Replace if damaged. |
| Intermitterende sein | Corroded terminals. Partially damaged wire. | Clean and secure all terminals. Inspect the cord for internal damage (e.g., kinks, cuts). |
| Fisiese skade aan die koord | Abrasion, cuts, or excessive bending. | The cord is not repairable if physically damaged. Replace with a new Autopilot 17206 cell cord. |
If troubleshooting steps do not resolve the issue, contact Autopilot customer support or a certified marine electronics technician.
Spesifikasies
- Model: Autopilot 17206
- Lengte: 12 voet
- Tipe: Cell Cord (Replacement)
- Vervaardiger: Autopilot
- Pakket afmetings: 8 x 6 x 6 duim (ongeveer)
- ASIN: B006H40CE2
Waarborg en Ondersteuning
For warranty information, technical support, or to purchase replacement parts, please visit the official Autopilot webwebwerf of kontak hul kliëntediensafdeling.
Jy kan meer inligting en kontakbesonderhede vind op die Autopilot Store on Amazon.