Lindy 4x2 HDMI 1.4 Switching Splitter (Model 38054) User Manual

Inleiding

Welcome to the user manual for the Lindy 4x2 HDMI 1.4 Switching Splitter, Model 38054. This device allows you to connect up to four HDMI or DVI source devices to two HDMI display devices, distributing signals simultaneously or switching between sources. Please read this manual thoroughly to ensure proper installation and operation.

Veiligheidsinligting

Please observe the following safety guidelines to prevent damage to the unit and ensure user safety:

• Do not expose this unit to rain, moisture, or liquids.
• Do not attempt to open the unit casing. Daar is geen onderdele binne wat deur die gebruiker onderhou kan word nie.
• Use only the provided power adapter. Using an unauthorized adapter may damage the unit and void the warranty.
• Verseker behoorlike ventilasie rondom die eenheid. Moenie enige ventilasie-openinge blokkeer nie.
• Disconnect power before cleaning. Clean the unit with a soft, dry cloth only.

Pakketinhoud

Verifieer dat jou pakket die volgende items bevat:

• Lindy 4x2 HDMI 1.4 Switching Splitter (Model 38054)
• Kragadapter
• Infrarooi afstandbeheer
• Gebruikershandleiding (hierdie dokument)

Produk Kenmerke

• Connects up to 4 HDMI/DVI source devices to 2 HDTV displays or projectors.
• Supports 1080p resolution and 3D video formats.
• Compatible with digital video formats in deep color mode (up to 36 bit).
• Supports lossless compressed digital audio formats, including Dolby TrueHD and DTS-HD Master Audio.
• Each selected input signal is simultaneously sent to both connected display devices.
• Includes an infrared remote control for convenient switching.
• Features signal re-timing, compensation, and regeneration for output signal transmission up to 10 meters.

Produk verbyview

The Lindy 4x2 HDMI 1.4 Switching Splitter is designed for efficient signal management in home theater or professional AV setups.

This image shows the front and top view of the Lindy 4x2 HDMI 1.4 Switching Splitter. The front panel typically features LED indicators for active inputs and outputs, along with buttons for manual switching. The rear panel, not fully visible, would contain the HDMI input and output ports, and the power input.

Voorpaneel

The front panel typically includes:

• Invoerkeuseknoppies: For manually selecting the desired HDMI input source (e.g., Input 1, Input 2, etc.).
• LED-aanwysers: To show which input is currently active and which outputs are connected.
• IR -ontvanger: For receiving signals from the infrared remote control.

Agterpaneel

Die agterpaneel sluit tipies in:

• HDMI Input Ports (x4): Connect your source devices (e.g., Blu-ray player, game console, PC).
• HDMI Output Ports (x2): Connect to your display devices (e.g., HDTV, projector).
• DC 5V ingang: Vir die koppeling van die meegeleverde kragadapter.

Opstelling en installasie

Follow these steps to set up your Lindy 4x2 HDMI 1.4 Switching Splitter:

1. Ensure all devices (source, display, and splitter) are powered off and unplugged from their power outlets.
2. Connect your HDMI source devices (e.g., DVD player, game console, PC) to the HDMI Input ports (HDMI IN 1-4) on the rear of the splitter using high-quality HDMI cables.
3. Connect your HDMI display devices (e.g., HDTV, projector) to the HDMI Output ports (HDMI OUT 1-2) on the rear of the splitter using high-quality HDMI cables.
4. Connect the provided power adapter to the DC 5V Power Input on the splitter, then plug the adapter into a suitable power outlet.
5. Power on your display devices, then your source devices, and finally the Lindy 4x2 HDMI 1.4 Switching Splitter.
6. Select the desired input source using the buttons on the front panel or the infrared remote control.

Bedryfsinstruksies

Handmatige skakeling

To switch between input sources manually, press the corresponding input selection button on the front panel of the splitter. The LED indicator for the active input will illuminate.

Afstandbeheer werking

Use the provided infrared remote control to select input sources. Point the remote control towards the IR receiver on the front panel of the splitter.

• Input 1-4 Buttons: Press the button corresponding to the desired HDMI input source (1, 2, 3, or 4).
• Kragknoppie: (If available on your remote) To power the unit on or off.

The selected input will be displayed on both connected output devices simultaneously.

Onderhoud

To ensure optimal performance and longevity of your Lindy 4x2 HDMI 1.4 Switching Splitter:

• Keep the unit in a cool, dry place, away from direct sunlight and heat sources.
• Clean the unit with a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the finish or internal components.
• Ensure proper ventilation and do not block any vents on the unit.

Probleemoplossing

If you encounter issues with your Lindy 4x2 HDMI 1.4 Switching Splitter, refer to the following common solutions:

Spesifikasies

Waarborg en Ondersteuning

This Lindy product comes with a 2 jaar waarborg vanaf die aankoopdatum.

For technical support, troubleshooting assistance, or warranty claims, please contact your local Lindy customer service or visit the official Lindy website for further assistance. Please retain your proof of purchase for warranty validation.