Xerox 7800/DX

Xerox 7800/DX Phase Color Laser Printer User Manual

Model: 7800/DX | Brand: Xerox

Produk verbyview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Xerox 7800/DX Phase Color Laser Printer with multiple paper trays

Figuur 1: Voorkant view of the Xerox 7800/DX Phase Color Laser Printer, showcasing its multi-tray design and control panel.

Opstel instruksies

1. Uitpak en Plasing

  • Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
  • Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. Kragverbinding

  • Koppel die kragkabel aan die drukker en dan aan 'n geaarde elektriese aansluiting.
  • Druk die kragknoppie om die drukker aan te skakel.

3. Installasie van tonerpatroon

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

  1. Open the front access panel of the printer.
  2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
  3. Skud die patroon liggies om die toner eweredig te versprei.
  4. Plaas elke patroon in die ooreenstemmende kleurgekodeerde gleuf totdat dit vasklik.
  5. Close the front access panel.
Close-up of a printer's internal components, possibly showing toner cartridge slots

Figuur 2: Example of an internal printer view, indicating where toner cartridges are typically installed.

4. Laai papier

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

  1. Pull out the desired paper tray. The printer has 2 trays as standard.
  2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
  3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
  4. Gently push the tray back into the printer.
  5. Confirm the paper type and size on the control panel if prompted.

5. Sagteware en drywer installasie

To enable printing from your computer, install the necessary drivers.

  • The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
  • Visit the official Xerox support webwebwerf om die nuutste drywers vir jou bedryfstelsel af te laai.
  • Volg die instruksies op die skerm om die installasie te voltooi.
  • Connect the printer to your computer via USB or Ethernet cable.

Bedryfsinstruksies

1. Beheerpaneel verbyview

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Close-up of a printer's touchscreen control panel

Figuur 3: Gedetailleerd view of the printer's touchscreen control panel, showing various menu options.

2. Basiese Drukwerk

  1. Maak die dokument wat jy op jou rekenaar wil druk, oop.
  2. Kies "Druk" vanaf die toepassing se spyskaart.
  3. Choose the Xerox 7800/DX printer from the list of available printers.
  4. Pas drukinstellings aan soos nodig, soos:
    • Kleur/Monochroom: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
    • Dupleks druk: Outomatiese dubbelsydige drukwerk word ondersteun.
    • Papierbron: Select the desired paper tray.
    • Afskrifte: Tot 312 kopieë per lopie.
  5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. Konnektiwiteit

  • Ethernet: Connect the printer to your network using an Ethernet cable for shared access.
  • USB: A single USB 2.0 port is available for direct connection to a computer.

Onderhoud

1. Toner Replacement

When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:

  1. Open the front access panel.
  2. Verwyder die leë tonerpatroon versigtig deur dit reguit uit te trek.
  3. Unpack a new, genuine Xerox toner cartridge of the correct color.
  4. Shake the new cartridge gently.
  5. Insert the new cartridge into the corresponding slot until it locks into place.
  6. Close the front access panel.

2. Skoonmaak

  • Buitekant: Vee die buite-oppervlaktes af met 'n sagte, damp, pluisvrye lap. Vermy skuurmiddels.
  • Binne: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

Probleemoplossing

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

Algemene kwessies en oplossings:

  • Drukker reageer nie:
    • Kontroleer die kragverbindings en maak seker dat die drukker aangeskakel is.
    • Verifieer netwerk- of USB-kabelverbindings.
    • Herbegin beide die drukker en jou rekenaar.
    • Maak seker dat die korrekte drukkerdrywer geïnstalleer en gekies is.
  • Swak drukgehalte:
    • Kontroleer tonervlakke en vervang enige lae tonerpatrone.
    • Perform a print head cleaning or calibration from the control panel.
    • Maak seker dat jy die regte papier vir jou drukinstellings gebruik.
  • Papierstoppe:
    • Follow the on-screen instructions on the control panel to locate and clear the jam.
    • Maak seker dat die papier korrek gelaai is en nie oorvol in die laaie is nie.
    • Remove any foreign objects from the paper path.

Tegniese spesifikasies

KenmerkSpesifikasie
Model NaamXerox 7800/DX
Druk tegnologieLaser
Drukker UitsetKleur
Maksimum drukspoed (kleur/monochroom)45 dpm
Max Print Resolution (Color/Monochrome)1200 x 2400 dpi
Dupleks drukOutomatiese
Maksimum invoerbladkapasiteit3140 velle
Aantal skinkborde2
Maksimum mediagrootte8.5 x 11 inch (up to 11 inches width)
Versoenbare toestellePC, Mac, Unix
VerbindingstegnologieEthernet, USB
Hardeware-koppelvlakUSB
Beheer metodeRaakskerm
Geheue berging kapasiteit2048 MB
Produkafmetings (L x B x H)27.52 x 25.24 x 37.52 duim
Item gewig256 pond
Ingesluit komponenteLaser drukker
Compatible Cartridge Numbers05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806

Waarborg inligting

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox webwebwerf.

Belangrike nota: All returns must be authorized by Xerox Corp. No exceptions.

Kliënte ondersteuning

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official webwebwerf.

Jy kan meer inligting en ondersteuningsbronne vind op die Xerox Store on Amazon or the main Xerox corporate webwebwerf.

© 2023 Xerox Corporation. Alle regte voorbehou.