Vivitar VIV548008DCKPANDMCG2 Flash Instruction Manual

1. Produk verbyview

The Vivitar VIV548008DCKPANDMCG2 is a dedicated shoe-mount flash unit designed for use with Panasonic Lumix DMC-G2 cameras. It offers advanced lighting control with TTL autoflash and manual flash modes, featuring a zoom head, vertical bounce, and horizontal swivel capabilities. This flash is equipped with an autofocus auxiliary lamp to assist in low-light conditions and supports wireless flash functions as both master and slave.

Beeld 1.1: Voorkant view of the Vivitar VIV548008DCKPANDMCG2 flash unit with the diffuser in an upward-tilted position. This image illustrates the flash head's bounce capability.

Beeld 1.2: Hoekig view of the Vivitar VIV548008DCKPANDMCG2 flash unit, highlighting the LCD display and control buttons. The display shows current flash settings, including manual power and zoom level.

2. Veiligheidsinligting

• Do not disassemble or attempt to repair the flash unit yourself. Refer to qualified service personnel.
• Hou die flitseenheid droog. Moenie dit aan reën, vog of hoë humiditeit blootstel nie.
• Vermy direkte blootstelling van die oë aan die flitslig, veral van naby, aangesien dit die sig kan belemmer.
• Use only specified batteries (2x 1.5V "AA" alkaline, lithium, NiCad & NiMH). Incorrect battery types may cause leakage or explosion.
• Hou buite bereik van kinders.
• Moenie die flits in die teenwoordigheid van vlambare gasse of vloeistowwe gebruik nie.

3. Pakketinhoud

Verifieer dat alle items in jou pakket teenwoordig is:

• Vivitar VIV548008DCKPANDMCG2 Flash Unit
• Flash Pouch
• Flitsverspreider
• Flash Reflecting Plate
• AC Rapid Battery Charger
• 4 x 2900mAh AA Batteries
• 5 Piece Cleaning Kit

4. Opstelling

4.1 Installeer batterye

1. Maak die batteryklep aan die agterkant van die flitseenheid oop.
2. Insert two 1.5V "AA" batteries (alkaline, lithium, NiCad, or NiMH) according to the polarity indicators inside the compartment.
3. Maak die batterykompartement se deksel stewig toe.

Let wel: Ensure batteries are fully charged before use. Use the provided AC Rapid Battery Charger for the included rechargeable batteries.

4.2 Heg aan kamera

1. Maak seker dat beide die kamera en flitseenheid afgeskakel is.
2. Skuif die flitseenheid se monteervoet in die kamera se flitsskoen.
3. Tighten the locking ring or lever on the flash unit's foot to secure it firmly to the camera.

5. Bedryfsinstruksies

5.1 Aan-/afskakel

• To power on, press and hold the power button (⑂) totdat die LCD-skerm aanskakel.
• Om af te skakel, druk en hou die aan/af-knoppie weer in totdat die LCD-skerm afskakel.

5.2 Basiese flitsmodusse

Druk die MODUS knoppie om deur beskikbare flitsmodusse te blaai:

• TTL (Through-The-Lens) Autoflash: Die flitsuitset word outomaties deur die kamera se meetstelsel beheer vir optimale blootstelling.
• Handmatige flits (M): You manually set the flash output power (e.g., 1/1, 1/2, 1/4, etc.). Use the dial/buttons to adjust power.

5.3 Zoemkop-aanpassing

The flash features a zoom head (24-85mm) that can be adjusted to match the focal length of your lens. Press the ZOOM button and use the dial/buttons to set the desired zoom position. In TTL mode, the flash may automatically adjust the zoom based on the camera's lens information.

5.4 Spring en Draai

The flash head can be tilted vertically up to 90° and swiveled horizontally up to 270° to bounce light off ceilings or walls for softer, more natural illumination. Gently adjust the flash head to the desired angle.

5.5 Wireless Flash Function

This flash supports wireless operation as a master or slave unit. Press the SLAVE GR/CH button to enter wireless mode and select the desired group (A, B, C) and channel. Refer to your camera's manual for specific wireless flash settings.

• Meester-modus: Controls other slave flash units.
• Slaafmodus: Triggered by a master flash unit or the camera's built-in flash.

6. Onderhoud

• Skoonmaak: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, slightly dampen the cloth with water. Do not use organic solvents. Use the provided cleaning kit for optical surfaces.
• Berging: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in a cool, dry place, preferably in its pouch.
• Batterysorg: Rechargeable batteries should be fully charged before storage and periodically recharged if stored for a long time.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Vivitar webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.

• Aanlyn ondersteuning: www.vivitar.com/support (Example link, actual link may vary)
• Kliëntediens: Refer to your product packaging for contact details.