InFocus IN116 Draagbare DLP-projektor Gebruikershandleiding

1. Inleiding

This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

Pakketinhoud

Verifieer dat al die items wat hieronder gelys word, in jou pakket ingesluit is:

• InFocus IN116 Projector
• Krag koord
• RGB kabel
• A / V-kabel
• Veiligheidsinstruksies
• Gebruikershandleiding (hierdie dokument)
• Afstandbeheer
• HDMI kabel

2. Produk verbyview

The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.

Sleutel kenmerke

• WXGA (1280 x 800) Native Resolution
• 2700 ANSI Lumens (2200 lumens in Eco Mode)
• 3000: 1 kontrasverhouding
• 3D-Ready functionality
• HDMI-verbinding
• Langdurige lamp vir langdurige gebruik
• Easy maintenance with no filters to replace

Projektor komponente

Beeld 1: Bo View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.

Beeld 2: Sykant View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.

Beeld 3: Voorkant View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.

Prent 4: Agter View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.

3. Opstelinstruksies

Plasing

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.

Koppel aan 'n kragbron

1. Koppel die kragkabel aan die projektor se kragtoevoer.
2. Steek die ander kant van die kragkabel in 'n geaarde elektriese aansluiting.

Verbind videobronne

The IN116 projector offers multiple input options:

• HDMI: Vir digitale video en klank. Koppel 'n HDMI-kabel vanaf jou brontoestel aan die projektor se HDMI-poort.
• VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
• Saamgestelde video: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
• S-video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.

For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.

4. Bedryfsinstruksies

Skakel aan/af

1. Om aan te skakel, druk die Krag knoppie op die projektor se beheerpaneel of die afstandbeheerder. Die kragaanwyserliggie sal brand.
2. Om af te skakel, druk die Krag button twice. The projector will enter a cooling cycle before shutting down completely.

Kies 'n invoerbron

Druk die Bron button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.

Pas die beeld aan

• Fokus: Draai die fokusring op die projektorlens totdat die beeld skerp en duidelik is.
• Zoem: Adjust the zoom ring on the projector lens to change the image size.
• Keystone-korreksie: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
• Prentmodusse: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.

Eko-modus

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.

3D-funksionaliteit

The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.

5. Onderhoud

Lamp Vervanging

Die projektor lamp het 'n beperkte lewensduur. Wanneer die lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Die lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.

1. Power off the projector and disconnect the power cord.
2. Allow the projector to cool down completely (at least 30 minutes).
3. Locate and open the lamp door on the top of the projector.
4. Verwyder die ou l versigtigamp module.
5. Installeer die nuwe lamp module, en maak seker dat dit stewig vas is.
6. Maak die l toeamp door and reconnect the power cord.
7. Stel die l terugamp timer in the projector's OSD menu.

Waarskuwing: Projektor lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.

Skoonmaak

• Buitekant: Gebruik 'n sagte, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
• Lens: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
• Filters: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.

6. Probleemoplossing

7. Spesifikasies

8. Waarborg en Ondersteuning

Beperkte waarborg

All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:

• Projektor: 5-jaar beperkte waarborg
• Onderdele en arbeid: 2 jaar volle waarborg
• Lamp: 6 maande waarborg

For detailed terms and conditions of the warranty, please refer to the official InFocus webwebwerf of kontak kliëntediens.

Kliënte ondersteuning

For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webwebwerf vir kontakinligting en bykomende hulpbronne.

Amptelik Webwebwerf: www.infokus.com