Pronomic M-602 Live/Studio Mixer Instruction Manual

1. Inleiding

The Pronomic M-602 is a professional 6-channel mixer designed for versatile audio applications in both live performance and studio environments. It features robust construction, low-noise circuitry for clear audio, and a musical 3-band equalizer on each channel. This manual provides essential information for the safe and effective operation of your M-602 mixer.

2. Veiligheidsinstruksies

Please read and understand these safety instructions before operating the device. Keep this manual for future reference.

• Kragbron: Only use the provided external power supply. Ensure the voltage voldoen aan die vereistes wat op die eenheid gespesifiseer is.
• Water en vog: Moenie die eenheid aan reën, vog of enige vloeistowwe blootstel nie. Moenie voorwerpe wat met vloeistowwe gevul is op die eenheid plaas nie.
• Ventilasie: Verseker voldoende ventilasie. Moenie ventilasie-openinge blokkeer nie.
• Hitte: Moenie die eenheid naby hittebronne soos verkoelers, hitteregisters, stowe of ander apparaat (insluitend ampversterkers) wat hitte produseer.
• Skoonmaak: Maak slegs skoon met 'n droë lap.
• Diens: Moenie probeer om hierdie eenheid self te diens nie. Verwys alle diens na gekwalifiseerde dienspersoneel.
• kabels: Beskerm die kragkoord teen geloop of vasgeknyp, veral by proppe, geriefshouers en die punt waar dit uit die apparaat kom.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• Pronomic M-602 Mixer Unit
• Eksterne kragtoevoer
• Instructiehandleiding (hierdie dokument)

4. Produk verbyview

The Pronomic M-602 mixer features a compact design with intuitive controls. Below is an illustration of the mixer's layout and a description of its main components.

4.1 Input/Output Panel (Top Rear)

• MIC Inputs (XLR): Balanced inputs for microphones.
• LINE Inputs (1/4" Jack): Balanced/unbalanced inputs for line-level instruments or devices.
• STEREO AUX RETURN (1/4" Jack): Inputs for external effects processors.
• MAIN OUT (1/4" Jack): Main stereo output to amphefers of opname toestelle.
• CTRL ROOM OUT (1/4" Jack): Output for control room monitors.
• FX SEND (1/4" Jack): Output to send signal to external effects processors.
• PHONES (1/4" Jack): Hooftelefoonuitgang.

4.2 Kanaalkontroles

Each channel (2 mono, 2 stereo) features the following controls:

• TRIM (Mono Channels): Adjusts the input gain for microphones and line inputs (max. +60 dB).
• EQ (hoog, middel, laag): 3-band equalizer for tone shaping (High: 12 kHz, Mid: 2.5 kHz, Low: 80 Hz).
• FX: Controls the amount of signal sent to the FX Send output (post-fader).
• PAN (Mono Channels) / BAL (Stereo Channels): Verstel die stereoposisie van die kanaal.
• KLIP LED: Brand wanneer die insetsein te hoog is, wat dui op moontlike afsnyding.
• VLAK: Pas die algehele uitvoervlak van die kanaal aan by die hoofmengsel.

4.3 Hoofseksie-kontroles

• CD/TAPE IN/OUT (RCA): Stereo RCA inputs/outputs for connecting CD players, tape decks, or other stereo devices. Assignable to Mix and Phones/CTRL.
• PHANTOM +48V Switch: Activates +48V phantom power for condenser microphones. An LED indicates activation.
• PHONES/CTRL Knob: Adjusts the level for the headphone and control room outputs.
• MAIN MIX Knob: Adjusts the overall output level of the main stereo mix.
• AUX RETURN Knob: Adjusts the level of the signal returning from external effects processors.
• LEVEL METER (LED): 4-segment LED display showing the main mix output level.
• KRAG-LED: Dui aan dat die eenheid aangeskakel is.

5. Opstelling

Volg hierdie stappe vir aanvanklike opstelling:

1. Kragverbinding: Connect the external power supply to the mixer's power input and then to a suitable power outlet. Ensure the mixer is switched off before connecting.
2. Uitsetverbinding: Connect the MAIN OUT jacks to your amplifier, powered speakers, or recording interface. For monitoring, connect your headphones to the PHONES jack or control room monitors to the CTRL ROOM OUT jacks.
3. Invoerverbinding:
   • For microphones, connect via the XLR inputs. If using condenser microphones, ensure the +48V PHANTOM power is activated (see Operating section).
   • For line-level instruments (keyboards, guitars with preamps) or other audio devices, connect via the 1/4" LINE inputs.
   • For stereo playback devices (CD player, smartphone), use the CD/TAPE IN RCA jacks.
4. Aanvanklike instellings: Before powering on, set all LEVEL, TRIM, EQ, FX, PAN/BAL, MAIN MIX, PHONES/CTRL, and AUX RETURN knobs to their minimum (fully counter-clockwise) positions.

6. Bedryf

6.1 Aan-/afskakel

After all connections are made and initial settings are at minimum, power on your amplifier/speakers first, then the M-602 mixer. To power off, reverse the order: mixer first, then amplifier/luidsprekers.

6.2 Aanpassing van invoervlakke

1. TRIM (Mono Channels): For mono channels, gradually increase the TRIM knob until the CLIP LED flashes only occasionally during the loudest parts of the input signal. Then, slightly reduce TRIM until the LED no longer flashes.
2. KanaalVLAK: Slowly raise the LEVEL knob for the active channel to send its signal to the main mix.
3. HOOFMENGSEL: Gradually increase the MAIN MIX knob to set the overall output volume. Monitor the LED level meter to avoid clipping (red LEDs).

6.3 Using the Equalizer (EQ)

Each channel has a 3-band EQ (High, Mid, Low). The center position is flat (no boost or cut). Turn clockwise to boost frequencies, counter-clockwise to cut them. Experiment to achieve the desired tone for each input.

6.4 Fantoomkrag (+48V)

If using condenser microphones, press the +48V PHANTOM switch. The corresponding LED will illuminate. Ensure dynamic microphones are not connected when phantom power is active, as this can cause damage to some dynamic microphones.

6.5 FX Send/Return

To use an external effects processor:

1. Connect the FX SEND jack to the input of your effects processor.
2. Connect the output of your effects processor to the STEREO AUX RETURN jacks.
3. Use the FX knob on each channel to send signal to the processor.
4. Use the AUX RETURN knob in the main section to control the overall level of the returned effect signal in the mix.

6.6 Monitering

Adjust the PHONES/CTRL knob to set the listening volume for your headphones or control room monitors.

7. Onderhoud

Behoorlike onderhoud verseker die lang lewensduur en optimale werkverrigting van jou menger.

• Skoonmaak: Disconnect the power supply before cleaning. Use a soft, dry cloth to wipe the surface of the mixer. Do not use liquid cleaners, solvents, or abrasive materials.
• Berging: When not in use for extended periods, store the mixer in a dry, dust-free environment.
• Kabelversorging: Avoid bending or kinking cables excessively. Store cables neatly to prevent damage.

8. Probleemoplossing

Indien u probleme ondervind, raadpleeg hierdie afdeling voordat u ondersteuning kontak.

9. Spesifikasies

10. Waarborg en Ondersteuning

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact Pronomic customer service through their official webwebwerf of jou plaaslike verspreider.