Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor User Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This device is designed to detect the sound of breaking glass, providing an early warning system for security applications. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Veiligheidsinligting

Neem altyd die volgende veiligheidsmaatreëls in ag:

Ontkoppel die krag voordat enige bedrading of onderhoud uitgevoer word.
Installasie moet deur gekwalifiseerde personeel uitgevoer word in ooreenstemming met alle plaaslike en nasionale elektriese kodes.
Do not expose the sensor to moisture or extreme temperatures.
Verseker behoorlike aarding om elektriese gevare te voorkom.
Hou buite bereik van kinders.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor
Monteer hardeware (skroewe, ankers)
Installasiegids (hierdie dokument)

4. Opstelling en installering

The FG-1625 sensor is designed for easy installation and can be mounted in various locations to cover all glass types within a 25-foot radius. It features a FlexCore Signal Processor for reliable detection.

4.1 Montageplek

Kies 'n monteerplek wat 'n onbelemmerde view of the protected glass. The sensor can be mounted on walls or ceilings. Avoid mounting directly opposite noisy areas or near air vents that could cause false alarms.

Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor mounted on a wall

Figure 1: Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This image shows the compact design of the sensor, typically mounted on a wall or ceiling for optimal glassbreak detection.

4.2 Bedradingsinstruksies

The FG-1625 is a hardwired sensor. Connect the sensor to your alarm control panel using the following wiring scheme:

V+ (Red Wire): Connect to the positive power terminal (12V DC).
V- (Black Wire): Connect to the negative power terminal (Ground).
C (Yellow Wire): Connect to the Common terminal of the alarm zone.
NC (Blue Wire): Connect to the Normally Closed terminal of the alarm zone.

Ensure all connections are secure and insulated. Refer to your alarm control panel's manual for specific zone wiring details.

4.3 Sensitiwiteitsaanpassing

The sensor features selectable sensitivity settings to optimize performance for different environments and glass types. Consult the internal dip switches or jumpers (refer to the sensor's internal diagram) to adjust sensitivity. Test the sensor after adjustment using a glassbreak simulator to confirm proper operation.

5. Operasie

Once installed and powered, the FG-1625 sensor continuously monitors for the specific acoustic frequencies associated with breaking glass. When these frequencies are detected, the sensor triggers an alarm condition on the connected security system.

Normale werking: The sensor remains in a standby state, monitoring its environment.
Alarm toestand: Upon detecting glass breakage, the sensor's relay changes state, signaling the alarm control panel.
LED-aanwyser: A built-in LED typically illuminates during detection or test mode to provide visual feedback. Refer to the sensor's internal documentation for specific LED behavior.

6. Onderhoud

The Honeywell Intellisense FG-1625 sensor requires minimal maintenance to ensure continued reliable operation.

Skoonmaak: Periodically wipe the sensor's exterior with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
Toets: It is recommended to test the sensor annually using a glassbreak simulator to confirm its detection capabilities. Follow the instructions provided with your simulator.
Omgewingskontroles: Ensure the sensor's environment remains free from excessive vibrations, loud noises (unrelated to glass breakage), or obstructions that could interfere with its acoustic detection.

7. Probleemoplossing

If the sensor is not functioning as expected, refer to the following common issues and solutions:

Probleem	Moontlike oorsaak	Oplossing
Sensor does not respond to glass breakage.	Geen krag na die sensor nie. Verkeerde bedrading. Sensitiwiteit te laag gestel. Obstruction blocking sound.	Kontroleer kragverbindings en toevoer. Verify wiring against Section 4.2. Adjust sensitivity (Section 4.3). Ensure clear line of sight to protected glass.
Vals alarms.	Sensitiwiteit te hoog gestel. Excessive ambient noise or vibration. Sensor mounted too close to noise sources.	Reduce sensitivity (Section 4.3). Relocate sensor away from noise sources. Ensure proper mounting to minimize vibration.
LED not illuminating during test.	Geen krag nie. Foutiewe sensor.	Kontroleer kragverbindings. Contact technical support if power is confirmed.

8. Spesifikasies

Kenmerk	Detail
Modelnommer	FG-1625 (000102701)
Handelsmerk	Ademco (Honeywell)
Soort sensor	Acoustic Glassbreak
Dekkingsgebied	Up to 25 feet radius
Kragbron	Corded Electric (typically 12V DC from alarm panel)
Kleur	Wit
Afmetings (L x B x H)	1 x 4 x 3 duim
Item gewig	2.88 onse (ongeveer 0.18 pond)
Alarm Uitset	Normally Closed (NC) Relay
UPC	781410449596

9. Waarborginligting

Specific warranty details for the Honeywell Intellisense FG-1625 sensor are typically provided at the point of purchase or within the product packaging. Generally, Ademco (Honeywell) products come with a limited manufacturer's warranty covering defects in materials and workmanship for a specified period from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty terms, contact your dealer or the manufacturer directly.

10. Tegniese Ondersteuning

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact your authorized Ademco/Honeywell dealer or security system installer. You may also visit the official Honeywell Security webwebwerf vir ondersteuningsbronne.

Ademco 000102701