Perel E305DIN1

Perel E305DIN1 DIN Rail Week Timer Instruction Manual

Model: E305DIN1

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Kenmerke

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

  • Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
  • 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
  • LCD-skerm: Clear display of time, day of the week, and current operating status.
  • NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
  • 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
  • Monteer opsies: Designed for DIN rail mounting or wall mounting using the included bracket.
  • Deursigtige beskermende dekking: Provides protection for the display and controls.

3. Opstelling en installering

Waarskuwing: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montering

The E305DIN1 timer can be mounted in two ways:

  • DIN-spoorbevestiging: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
  • Muurmontering: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Elektriese aansluiting

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

  1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
  2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
  3. Dubbelkontroleer alle verbindings vir styfheid en korrektheid voordat u die krag herstel.
Perel E305DIN1 DIN Rail Week Timer with transparent cover

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Bedryfsinstruksies

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Instelling van Huidige Tyd en Dag

  1. Druk die KLOK knoppie.
  2. Terwyl jy vashou KLOK, druk die DAG knoppie om die huidige dag van die week te stel.
  3. Terwyl jy vashou KLOK, druk die UUR knoppie om die huidige uur te stel.
  4. Terwyl jy vashou KLOK, druk die MIN knoppie om die huidige minuut te stel.

4.2 Programmering van AAN/AF Tye

The timer allows for up to 8 ON/OFF program pairs.

  1. Druk die PROG button once to enter program mode. The display will show '1 ON'.
  2. Gebruik die DAG, UUR, en MIN knoppies om die verlangde AAN-tyd vir program 1 in te stel.
  3. Druk PROG weer. Die skerm sal '1 AF' wys.
  4. Gebruik die DAG, UUR, en MIN knoppies om die verlangde AF-tyd vir program 1 in te stel.
  5. Repeat steps 1-4 for programs 2 through 8.
  6. Druk die KLOK button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

  • Druk die HANDLEIDING knoppie om deur die modusse te blaai:
  • OP: The output is continuously ON, overriding any programmed OFF times.
  • AF: The output is continuously OFF, overriding any programmed ON times.
  • VOERTUIG: The timer operates according to the programmed ON/OFF schedules.

5. Onderhoud

The Perel E305DIN1 timer requires minimal maintenance.

  • Skoonmaak: Vee die buitekant af met 'n sagte, droë lap. Moenie skuurmiddels of oplosmiddels gebruik nie.
  • Battery-rugsteun: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
  • Omgewingstoestande: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Probleemoplossing

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

  • Timer skakel nie AAN/AF soos geprogrammeer nie:
    • Kontroleer of die timer in is AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
    • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
    • Ensure the current time and day are accurately set on the timer.
  • Skerm is leeg of flikker:
    • Check the main power supply to the timer.
    • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
  • Timer verloor instellings na kragonderbrekingtage:
    • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
  • Time drift (timer becomes inaccurate over time):
    • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Indien hierdie stappe nie die probleem oplos nie, kontak asseblief kliëntediens.

7. Spesifikasies

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

Kragtoevoer220 ~ 250VAC / 50Hz
Output (Resistive Load)16A @ 230VAC, max. 3680W
Output (Inductive Load)8A @ 230VAC (cos µ = 0.4)
Minimum Switching Interval1 minuut
Kragverbruik4.4 W
Bedryfstemperatuur-10°C tot 40°C
Tyd Akkuraatheid± 1 minuut per maand
RugsteunbatteryNiMH, up to 200h autonomy
MonteringDIN Rail or Wall Mount
MateriaalPlastiek
KleurDeursigtig

8. Waarborg en Ondersteuning

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Bewaar u aankoopbewys as bewys van aankoop vir waarborgdoeleindes.