1. Inleiding
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Figuur 1.1: Voorkant view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Veiligheidsinligting
WAARSKUWING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Maak seker dat alle verbindings veilig en behoorlik geïsoleer is.
- Moenie die produk op enige manier verander nie.
3. Komponentelys
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Opstelling en installering
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Skakel krag af: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Prepare Housing: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Heg sok aan: Die lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Installeer gloeilamp: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Herstel krag: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Figuur 4.1: Bo-na-onder view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Bedryfsinstruksies
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Verseker die korrekte wattage bulb (up to 250W) is installed.
- Gebruik die muurskakelaar om die ligte aan of af te skakel.
6. Onderhoud
The P8072-28 Recessed Trim requires minimal maintenance.
- Skoonmaak: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp lap. Moenie skuurmiddels of oplosmiddels gebruik nie, aangesien dit die afwerking kan beskadig.
- Gloeilamp vervanging: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | Geen krag aan die armatuur nie. Gloeilamp is los of uitgebrand. Verkeerde bedrading. | Gaan stroombreker / lont na. Draai gloeilamp vas of vervang. Raadpleeg 'n gekwalifiseerde elektrisiën om die bedrading na te gaan. |
| Trim does not sit flush with ceiling. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| Ligte flikkerings. | Los gloeilamp. Onversoenbare dimmerskakelaar. Bedradingskwessie. | Draai die gloeilamp vas. Ensure dimmer is compatible with incandescent lights. Raadpleeg 'n gekwalifiseerde elektrisiën. |
8. Spesifikasies
| Kenmerk | Detail |
|---|---|
| Modelnommer | P8072-28 |
| Handelsmerk | Progress Lighting |
| Tik | Recessed Trim (Open Splay) |
| Kleur | Wit |
| Materiaal | Aluminium |
| Buite deursnee | 7-3/4 duim (19.69 cm) |
| Produkafmetings (L x B x H) | 7.75" x 7.75" x 4.75" (19.69 cm x 19.69 cm x 12.07 cm) |
| Item gewig | 5.9 onse (167 gram) |
| Voltage | 120 Volt |
| Max Wattage | 250 Watts (Incandescent) |
| Kragbron | Elektries met koord |
| Binne/buiteluggebruik | Binneshuise |
| Versoenbare behuising | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Waarborginligting
This Progress Lighting P8072-28 Recessed Trim comes with a 1-jaar beperkte waarborg from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Ondersteuning en Kontak
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting webwebwerf vir die mees onlangse kontakinligting.
Progress Lighting Official Webwebwerf: Visit the Progress Lighting Store on Amazon