Silverline 850W SDS Plus Hammer Drill (Model 633821) User Manual

1. Inleiding

Thank you for choosing the Silverline 850W SDS Plus Hammer Drill, Model 633821. This powerful and versatile tool is designed for drilling in masonry, wood, and steel, as well as for light chiseling tasks. To ensure safe and efficient operation, please read this manual thoroughly before using the tool. Keep this manual in a safe place for future reference.

Image 1.1: The Silverline 850W SDS Plus Hammer Drill. This image shows the main unit of the hammer drill, highlighting its robust construction and ergonomic design.

2. Veiligheidsinstruksies

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This section outlines general safety guidelines for power tools and specific precautions for hammer drills.

2.1 Algemene kraggereedskapveiligheid

• Werksarea veiligheid: Hou jou werkarea skoon en goed belig. Oorvol of donker areas nooi ongelukke uit. Moenie elektriese gereedskap in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
• Elektriese veiligheid: Kraggereedskapproppe moet by die aansluiting pas. Moet nooit die prop op enige manier verander nie. Vermy liggaamskontak met geaarde oppervlaktes soos pype, verkoelers, stowe en yskaste.
• Persoonlike veiligheid: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts.
• Gereedskap gebruik en versorging: Moenie die kraggereedskap forseer nie. Gebruik die korrekte kraggereedskap vir u toepassing. Ontkoppel die prop van die kragbron voordat u enige aanpassings maak, bykomstighede verander of kraggereedskap bêre.

2.2 Specific Hammer Drill Safety

• Hold Tool Firmly: Always hold the tool firmly with both hands to maintain control, especially during hammer drilling or chiseling.
• Veilige werkstuk: Maak seker dat die werkstuk stabiel en stewig vas isamped om beweging tydens operasie te voorkom.
• Check for Hidden Utilities: Before drilling into walls, floors, or ceilings, check for hidden electrical wires, gas pipes, or water pipes using a suitable detector.
• Stofbestuur: Drilling and chiseling can generate significant dust. Use a dust guard and wear a dust mask to protect your respiratory system.
• Oorverhitting: Allow the tool to cool down during prolonged use to prevent overheating.

3. Pakketinhoud

Carefully unpack the Silverline 850W SDS Plus Hammer Drill and check that all items are present and undamaged. If any items are missing or damaged, please contact your retailer.

• Silverline 850W SDS Plus Hammer Drill
• Durable Carry Case
• 13 mm Sleutel Chuck
• Chuck Sleutel
• SDS Plus Shaft and Screw
• SDS Plus Masonry Drill Bits (6mm, 8mm, 10mm)
• Plat beitel
• Pointed Chisel
• Diepte stop
• Speldmoersleutel
• Stofwag
• Grease Pot
• Gebruikershandleiding

Image 3.1: The Silverline 850W SDS Plus Hammer Drill, its durable carry case, and included accessories.

Beeld 3.2: Nabyskoot view of the included accessories, including SDS Plus drill bits, chisels, depth stop, pin wrench, and grease pot.

4. Produkkenmerke

The Silverline 850W SDS Plus Hammer Drill is equipped with features designed for performance and user convenience:

• Kragtige 850W motor: Verskaf ample power for demanding drilling and chiseling tasks.
• Veelvuldige bedryfsmodusse: Easily switch between Drill, Hammer Drill, and Rotary Stop Chisel modes for various applications.
• SDS Plus Chuck System: For quick, tool-free bit changes and efficient power transfer.
• Integrated Safety Clutch: Protects the user and the tool in case of bit jamming.
• Veranderlike spoedbeheer: Allows for precise control over drilling speed, up to 800 RPM.
• High Impact Force: Delivers 3.5 Joules of impact energy at 4,000 impacts per minute for effective masonry work.
• Hulphandvatsel: Provides improved control and comfort during operation.
• Diepte stop: Vir konsekwente boordiepte.

5. Opstelling

Before operating the hammer drill, ensure it is properly set up for your task.

5.1 Bevestig die hulphandvatsel

1. Maak die hulphandvatsel los deur dit antikloksgewys te draai.
2. Skuif die handvatsel oor die voorkant van die boorliggaam.
3. Adjust the handle to a comfortable and secure position, then tighten it by twisting clockwise.

5.2 Inserting SDS Plus Bits

1. Clean the shank of the SDS Plus bit and apply a small amount of grease (from the supplied pot) to it.
2. Pull back the chuck sleeve on the drill.
3. Insert the SDS Plus bit into the chuck until it clicks into place.
4. Release the chuck sleeve. Pull on the bit to ensure it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5.3 Using the 13mm Keyed Chuck (for standard drill bits)

For drilling in wood or metal with standard round or hex shank drill bits, use the included 13mm keyed chuck.

1. Ensure the hammer drill is in 'Drill' mode (no hammer action).
2. Insert the SDS Plus shaft of the 13mm keyed chuck into the SDS Plus chuck of the hammer drill as described in section 5.2.
3. Open the jaws of the 13mm chuck using the chuck key.
4. Insert your standard drill bit and tighten the chuck jaws securely with the chuck key.

5.4 Stel die bedryfsmodus in

The mode selector switch allows you to choose between three operating modes:

• Drill Mode (Rotation Only): Vir boorwerk in hout, metaal en plastiek.
• Hammer Drill Mode (Rotation with Hammer Action): For drilling in concrete, brick, and other masonry materials.
• Rotary Stop Chisel Mode (Hammer Action Only): For light chiseling, chipping, and demolition work.

Rotate the mode selector switch to the desired setting. Ensure it clicks firmly into place.

5.5 Aanpassing van die dieptestop

1. Maak die hulphandvatsel los.
2. Insert the depth stop rod through the hole in the auxiliary handle.
3. Adjust the rod so that the desired drilling depth is achieved when the end of the rod touches the workpiece.
4. Tighten the auxiliary handle to secure the depth stop.

6. Bedryfsinstruksies

Follow these steps for safe and effective operation of your hammer drill.

6.1 Begin en stop

• Om te begin: Plug the tool into a suitable power outlet. Press the ON/OFF trigger switch.
• Om te stop: Release the ON/OFF trigger switch.
• Deurlopende werking: For continuous operation, press the ON/OFF trigger switch and then press the lock-on button. To release, press the trigger switch again.

6.2 Spoedbeheer

The drill features variable speed control. The drilling speed can be adjusted by the pressure applied to the trigger switch. For higher speeds, press the trigger further. For lower speeds, apply less pressure.

6.3 Drilling in Masonry (Hammer Drill Mode)

1. Select 'Hammer Drill' mode.
2. Insert an appropriate SDS Plus masonry drill bit.
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply firm, steady pressure. Do not force the drill; let the hammer action do the work.

6.4 Drilling in Wood and Metal (Drill Mode)

1. Select 'Drill' mode.
2. Insert a standard drill bit using the 13mm keyed chuck (see section 5.3).
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply moderate pressure.

6.5 Chiseling (Rotary Stop Chisel Mode)

1. Select 'Rotary Stop Chisel' mode.
2. Insert a flat or pointed SDS Plus chisel.
3. Position the chisel on the material to be removed.
4. Start the drill and apply steady pressure. Guide the chisel along the desired path.

7. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your tool. Always disconnect the tool from the power supply before performing any maintenance.

7.1 Skoonmaak

• Hou die ventilasiegleuwe skoon om oorverhitting te voorkom.
• Maak die gereedskapbehuising gereeld skoon met 'n sagte, damp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.
• Verwyder enige stof of puin van die boorkop en beithouer na elke gebruik.

7.2 Smering

The SDS Plus chuck mechanism requires periodic lubrication. Use the supplied grease or a suitable equivalent for SDS Plus systems.

• Apply a small amount of grease to the shank of SDS Plus bits before insertion.
• Refer to the tool's internal lubrication points (often accessible via a screw cap) for periodic greasing of the hammer mechanism. Consult a qualified service technician if unsure.

7.3 Vervanging van koolstofborsels

This tool uses carbon brushes, which are wear parts. When the carbon brushes wear down, the motor may spark excessively or stop working. Carbon brushes should be replaced by a qualified service technician.

7.4 Berging

Store the tool in its durable carry case in a dry, secure place, out of reach of children.

8. Probleemoplossing

This section addresses common issues you might encounter with your hammer drill.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Silverline customer support or a qualified service center.

9. Spesifikasies

Technical data for the Silverline 850W SDS Plus Hammer Drill, Model 633821.

10. Waarborg en Ondersteuning

10.1 Vervaardiger se waarborg

The Silverline 850W SDS Plus Hammer Drill (Model 633821) comes with a 5 jaar vervaardiger se waarborgHierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik. Bewaar asseblief u bewys van aankoop vir waarborgeise.

For full terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official Silverline webwebwerf.

10.2 Kliëntediens

For technical assistance, spare parts, or service inquiries, please contact Silverline customer support. Contact details can typically be found on the Silverline webwebwerf of op die produkverpakking.

When contacting support, please have your product model number (633821) and serial number (if applicable) ready.