Invicta Men's 3826 Pro Diver Automatic Watch User Manual

1. Produk verbyview

This manual provides instructions for the Invicta Men's 3826 Pro Diver Automatic Watch. This timepiece features a robust design, an automatic movement that powers itself with wrist motion, a durable sapphire crystal, and a gold-plated stainless steel case with a gold dial. It is designed for reliability and functionality, including a date display and significant water resistance.

Sleutel kenmerke sluit in:

• Automatic movement, eliminating the need for a battery.
• Scratch-resistant sapphire crystal.
• 47 mm gold-plated stainless steel case with a gold dial.
• Date display function.
• Water resistance up to 200 meters (660 feet), suitable for recreational scuba diving.

Beeld 1.1: Voorkant view van die Invicta Men's 3826 Pro Diver Outomatiese Horlosie, vertoonasing its gold-plated stainless steel case, gold dial, and overall design.

2. Opstelinstruksies

2.1 Winding the Automatic Movement

Your Invicta 3826 watch is equipped with an automatic mechanical movement. It does not require a battery. The watch is powered by the natural motion of your wrist. To initiate power if the watch has stopped:

1. Gently shake the watch from side to side for approximately 30 seconds to start the movement.
2. Alternatively, manually wind the watch by rotating the crown clockwise while it is in its normal, pushed-in position (position 0). Wind approximately 20-30 turns until the second hand begins to move smoothly.

Regular wear will keep the watch sufficiently wound. If worn daily for 8-12 hours, manual winding should not be necessary.

2.2 Stel tyd en datum in

Om die tyd en datum op jou horlosie in te stel:

1. Pull the crown out to Position 2 (farthest out). This stops the second hand. Rotate the crown to set the hour and minute hands. Ensure the AM/PM is correctly set by advancing the hands past 12 o'clock to see if the date changes.
2. Push the crown in to Position 1 (middle position). Rotate the crown to set the date. Turn the crown until the correct date appears in the date window. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Push the crown back in to Position 0 (normal position). Maak seker dat die kroon volledig ingedruk is om waterbestandheid te handhaaf.

3. Bediening van jou horlosie

3.1 Dra die horlosie

Fasten the watch securely but comfortably on your wrist using the deployment clasp with safety. The automatic movement relies on your wrist's motion, so consistent wear is recommended for optimal performance.

3.2 Waterweerstand

This watch is water resistant to 200 meters (660 feet). This rating makes it suitable for recreational scuba diving. However, always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the crown or pushers (if any) while the watch is submerged or wet, as this can compromise the water seal.

4. Sorg en Onderhoud

4.1 Skoonmaak

To maintain the appearance of your gold-plated stainless steel watch:

• Vee die kas en band af met 'n sagte, damp lap.
• For stubborn dirt, use a mild soap solution and a soft brush, then rinse thoroughly with clean water and dry immediately with a soft cloth.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the gold plating and seals.

4.2 Saffierkristalversorging

The sapphire crystal is highly scratch-resistant. Clean it with a soft, lint-free cloth. While durable, it is not entirely shatterproof; avoid severe impacts.

4.3 Berging

When not wearing the watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields, which can affect the accuracy of the automatic movement.

5. Probleemoplossing

5.1 Horlosie loop nie of verloor tyd

• Onvoldoende Wikkeling: Ensure the watch is adequately wound either by wearing it consistently or by manually winding it (refer to Section 2.1).
• Lack of Movement: If the watch is not worn for an extended period, the power reserve will deplete. Re-wind as per Section 2.1.
• Magnetiese velde: Exposure to strong magnetic fields can affect accuracy. If suspected, consult a professional watchmaker for demagnetization.

5.2 Datum verander nie korrek nie

• Incorrect Time Setting: Ensure the time is set correctly, especially the AM/PM cycle, as the date changes around midnight.
• Date Setting Restriction: Avoid setting the date manually between 9 PM and 3 AM. If the date needs adjustment during this period, first set the time outside this window, adjust the date, then reset the time.

5.3 Water Intrusion

If moisture or condensation appears inside the watch crystal, immediately take the watch to a qualified service center. This indicates a compromised water seal, and prompt action is necessary to prevent further damage to the movement.

6. Tegniese spesifikasies

6.1 Watch Case Size Reference

Image 6.1: A visual guide illustrating different watch case diameters, providing a reference for the 47mm case size of the Invicta 3826 model.

7. Waarborginligting

The warranty for your Invicta 3826 Pro Diver Automatic Watch is provided by the seller of record. For specific details regarding warranty coverage, duration, and claims, please contact the seller directly.

8. Kliëntediens

For further assistance, technical support, or service inquiries regarding your Invicta watch, please refer to the following resources:

• Kontak Verkoper: For product-specific questions or warranty claims, contact the original seller.
• Invicta Brand Store: Visit the official Invicta brand store for general information and product range: Invicta Store on Amazon