TFA Digital Comfort Control Thermo-Hygrometer

Inleiding

This manual provides detailed instructions for the setup, operation, and maintenance of your TFA Digital Comfort Control Thermo-Hygrometer Model 30.5011. This device is designed to monitor indoor temperature and humidity levels, display dew point, and alert you to potential mold risk, helping you maintain a comfortable and healthy indoor environment.

Veiligheidsinligting

• Moenie die toestel blootstel aan uiterste temperature, direkte sonlig of hoë humiditeit nie.
• Vermy om die toestel te laat val of om dit aan sterk impakte te onderwerp.
• Moenie probeer om die toestel self uitmekaar te haal of te herstel nie. Kontak gekwalifiseerde personeel vir diens.
• Hou batterye buite bereik van kinders. Gooi gebruikte batterye behoorlik weg volgens plaaslike regulasies.
• Verwyder batterye as die toestel nie vir 'n lang tydperk gebruik gaan word om lekkasie te voorkom.

Pakketinhoud

Kontroleer asseblief dat alle items teenwoordig en in goeie toestand is:

• TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011)
• Afneembare staander
• Instructiehandleiding (hierdie dokument)

Note: 2 AA batteries are required for operation and may be included depending on the retailer.

Toestel verbyview

The TFA Digital Comfort Control Thermo-Hygrometer features a clear display and intuitive controls for monitoring your indoor climate.

Image: The TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011) shown on a table, displaying current humidity (69%), temperature (18.1°C), and dew point (10.0°C). A red indicator light for mold risk is visible.

Voorskerm:

• Humiditeit vertoon: Shows current relative humidity in percentage (%).
• Temperatuur vertoon: Shows current temperature in Celsius (°C) or Fahrenheit (°F).
• Dew Point Display: Shows the dew point temperature.
• Mold Risk Indicator: A visual alarm (flashing light) and optional audio alarm indicate when humidity levels exceed a set threshold, signaling a risk of mold formation.
• MIN/MAX-aanwyser: Shows minimum or maximum recorded values.

Back/Side Controls:

• MIN/MAX-knoppie: Druk om view minimum/maximum recorded temperature, humidity, and dew point. Press and hold to reset these values.
• °C/°F-knoppie: Switch between Celsius and Fahrenheit temperature display.
• SET -knoppie: Used to enter settings mode for mold alarm thresholds and audio alarm.
• Battery kompartement: Located on the back, for 2 AA batteries.
• Stand Slot: For attaching the detachable stand.

Opstelling

1. Battery Installasie

1. Vind die batteryklepdeksel aan die agterkant van die toestel.
2. Skuif of knip die deksel los om die kompartement oop te maak.
3. Plaas twee (2) AA-batterye in en maak seker dat die polariteit (+ en -) korrek is soos aangedui in die kompartement.
4. Plaas die batterykompartement se deksel veilig terug.
5. The device will power on automatically and begin displaying current temperature and humidity.

2. plasing

Place the thermo-hygrometer on a flat surface using its detachable stand. For accurate readings, choose a location away from direct sunlight, heat sources, air conditioning vents, and areas with high airflow. Avoid placing it near windows or doors where external conditions might influence readings.

Bedryfsinstruksies

Viewing Minimum and Maximum Values

• Druk die MIN / MAX button once to display the maximum recorded temperature, humidity, and dew point since the last reset.
• Druk die MIN / MAX knoppie weer om die minimum aangetekende waardes te vertoon.
• Druk die MIN / MAX button a third time to return to current readings.
• To reset the MIN/MAX values, press and hold the MIN / MAX knoppie vir ongeveer 3 sekondes terwyl viewing either MIN or MAX values. The display will flash, indicating the values have been reset.

Veranderende Temperatuureenheid (°C/°F)

Druk die ° C / ° F. button located on the back or side of the device to switch between Celsius and Fahrenheit temperature units.

Setting Mold Alarm Thresholds and Audio Alarm

The device features a visual and optional audio alarm to indicate high humidity levels that could lead to mold growth. The threshold can typically be set to 55%, 60%, or 65% relative humidity.

1. Druk en hou die STEL button for approximately 3 seconds to enter the alarm setting mode.
2. The current humidity threshold will flash. Use the MIN / MAX button to cycle through available thresholds (e.g., 55%, 60%, 65%).
3. Druk STEL again to confirm the humidity threshold and move to the audio alarm setting.
4. Gebruik die MIN / MAX button to toggle the audio alarm ON or OFF.
5. Druk STEL one more time to save your settings and exit the alarm setting mode.

When the humidity exceeds the set threshold, the red mold risk indicator light will flash. If the audio alarm is enabled, it will also sound.

Onderhoud

Skoonmaak

Vee die toestel af met 'n sagte, damp lap. Moenie skuurmiddels of oplosmiddels gebruik nie, aangesien dit die skerm ofasing. Ensure no moisture enters the device.

Battery vervanging

When the battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps outlined in the Setup section. Always replace both batteries at the same time with new AA batteries.

Probleemoplossing

Spesifikasies

• Model: 30.5011
• Handelsmerk: TFA
• Temperatuurreeks: -10°C tot 60°C (14°F tot 140°F)
• Relatiewe humiditeitreeks: 1% tot 99%
• Krag: 2 x AA -batterye (1.5V)
• Afmetings: 3.74 x 0.98 x 3.74 duim (9.5 x 2.5 x 9.5 cm)
• Gewig: 3.17 onse (90 gram)
• Montage tipe: Tafelblad

Waarborg en Ondersteuning

Vir waarborginligting of tegniese ondersteuning, verwys asseblief na die dokumentasie wat tydens aankoop verskaf is of kontak u kleinhandelaar. Bewaar u aankoopbewys as bewys van aankoop.