Progress Lighting P5607-31 Traditional Outdoor Wall Lantern User Manual

1. Belangrike veiligheidsinligting

Lees en verstaan ​​asseblief alle instruksies voordat u met die installasie begin. Versuim om dit te doen kan lei tot elektriese skok, brand of ander beserings wat dodelik kan wees of skade aan eiendom kan veroorsaak.

• WAARSKUWING: Risiko van elektriese skok. Ontkoppel die krag by die stroombreker of sekeringkas voor installasie of onderhoud.
• Alle elektriese verbindings moet in ooreenstemming wees met plaaslike kodes, verordeninge of die Nasionale Elektriese Kode (NEC). Raadpleeg 'n gekwalifiseerde elektrisiën as u nie vertroud is met behoorlike elektriese bedradingsverbindings nie.
• Use only UL/cUL listed wire connectors.
• Hierdie produk mag chemikalieë bevat wat volgens die staat Kalifornië kanker, geboortedefekte of ander reproduktiewe skade kan veroorsaak (waarskuwing van Proposisie 65). Was hande na hantering.

2. Produk verbyview

The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.

Figuur 2.1: Voorkant view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.

Figuur 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.

3. Opstelling en installering

3.1 Pakketinhoud

Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.

3.2 Voorinstallasie

1. Skakel die krag af by die hoofstroombreker of sekeringboks.
2. Carefully unpack the fixture and components.

3.3 Monteer die armatuur

This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.

1. Heg die monteerbeugel aan die aansluitkas met behulp van die meegeleverde skroewe.
2. Ensure the bracket is level and securely fastened.

3.4 Elektriese verbindings

Connect the fixture wires to the house wires according to the following:

• Verbind die swart draad van die toebehore met die swart (warm) draad van die aansluitboks.
• Verbind die wit draad van die toebehore aan die wit (neutrale) draad van die aansluitboks.
• Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
• Secure all connections with UL/cUL listed wire connectors.

3.5 Bevestiging van die toebehore

1. Steek alle drade versigtig in die aansluitkas.
2. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.

3.6 Gloeilampinstallasie

This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.

Figuur 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.

1. Screw the bulb into the socket until snug. Do not overtighten.
2. This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.

3.7 Aanbevole plasing

For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.

Figuur 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.

Figuur 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.

4. Operasie

Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.

5. Onderhoud

5.1 Skoonmaak

Om die toestel skoon te maak, skakel die krag af en vee dit af met 'n sagte, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.

5.2 Gloeilampvervanging

Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.

6. Probleemoplossing

• Lig gaan nie aan nie:
  • Check that the power is turned on at the circuit breaker.
  • Ensure the bulb is securely screwed into the socket and is not burnt out.
  • Verifieer dat alle elektriese verbindings veilig is.
  • Inspect for any defective electrical components or wiring.
• Fuse blows or circuit breaker trips:
  • Check for crossed wires or short circuits.
  • Verseker die gloeilamp wattage does not exceed the fixture's maximum rating (100W).

7. Spesifikasies

Figuur 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.

8. Waarborginligting

This Progress Lighting product is covered by a 1 jaar beperkte waarborg. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.

9. Ondersteuning

For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official webwebwerf of op die produkverpakking.